Payment & Shipping Terms:
|Product Name:||UV Laser Marking Machine For Plastic Ceramic Metal ABS Metal Glass Leather||Aser Wavelength:||355nm|
|Graphic Format Supported:||AI, BMP, DST, DWG, DXF, DXP, LAS, PLT, JPG,PNG||Marking Speed:||1-8000mm/s|
|Repetition Precision:||0.002mm||Repetition Rate:||20KHZ-200KHZ|
High Precision Ultraviolet Laser Marking Machine , Glass Leather UV Laser Printer
Ultraviolet lasers have benefits that other lasers do not have that is Ability to limit thermal stress.This is because most UV laser systems are running at low power.
By using techniques sometimes called "cold ablation",the beam of the UV laser produces a reduced heat affected zone and minimize the effects of edge processing, carbonation, and other thermal stresses.These negative effects are usually present with higher power lasers.
UV laser marking machine can mark logo, character, serial number, bar code, data matrix on both metals and some non-metals. It does not have consumable. It’s very cost effective. It boasts fast marking speed and high marking precision. It’s widely used and well accepted in prevailing international marker
|Model number||UV Laser Marking Machine for Plastic Ceramic Metal ABS Metal Glass Leather|
|Average output power||3w/5w|
|Engraving line speed||<=7000mm/s|
|The minimum line width||0.01mm|
|Cooling method||Air cooling|
1) Intergrative design, compact structure.
2) Same configuration and good quality, dealer price.
3) One year warranty, engineers available to service machinery overseas.
4) Excellent light quality:
Comparing with traditional solid laser marking machine, angle of divergence is only 1/4 of diode pump laser device. It is especially suitable for precision marking.
5) Low usage cost:
Photo electric conversion efficiency max is 30%, whole machine power consumption is less than 500W, it is the 1/10 of laser pump lamp marking machine. It greatly saves the cost in power consumption.
6) Free maintenance & long service life:
Using laser diode as the source of pump, full sealing light path design, its average no-failure operation is over 100 thousand hours.
Metals: carbon steel/mild steel, stainless steel, aluminum, copper, magnesium, zinc; rare metal and alloy steel (gold, silver,titanium, etc.); special surface treatment (aluminum anodized, plating surface, surface oxygen breaking of aluminum and magnesium alloy)
Non-metals: plastics, rubber, resin, carton box, etc.
electronic components, IC, electrical appliances, mobile phones, plastic buttons, color paper, food packaging, clocks and watches, molds, gaskets and seals, bearing, auto parts, hardware, tools, building materials, PVC tubes, etc.
Contact Person: Liu